Поиск
Close this search box.
Поиск
Close this search box.

Characteristics of co-rotating Twin screw extruder

Characteristics of intermeshing co-rotating twin screw extruder

There are many kinds of twin screw extruders, of which the intermeshing co-rotating twin screw extruder is a kind of production and processing equipment widely used in the plastic industry. This kind of extruder is composed of two meshing «building block» screws, barrel, power device, temperature control device, etc. there can be multiple feeding ports and vacuum / non vacuum devolatilization ports on the body.

The intermeshing co-rotating twin screw extruder mainly has the following characteristics:

1. The two screws rotate in parallel and in the same direction, resulting in uniform shear action between the contact parts and the barrel, and the strength of this shear action can be adjusted by screw combination, spacing design and other means.

Characteristics of co-rotating twin screw extruder 1
Characteristics of co-rotating twin screw extruder 2
Characteristics of co-rotating twin screw extruder 3

2. The geometry of the screw block and the same direction rotation make the screw have good material distribution and mixing ability, which is suitable for mixing operation. After the material is softened after entering the material barrel, because the twin-screw is in the opposite direction at the meshing position, one screw will pull the material into the meshing gap, and the other screw will push it out of the gap, so the material is transferred from one screw to the other screw here, in a «∞» motion. This motion has a large relative speed at the meshing position, which is very conducive to the mixing and homogenization of the material, and the gap in the meshing area is very small, The speed of the thread and groove at the kneading point is opposite, which has a high shear effect, so as to achieve the effect of uniform plasticization.

3. Both screw and barrel are combined. There are many kinds of screw elements, including conveying element, kneading element, shearing element, reverse screw element and pressurized screw element, which play different roles. According to the needs of material processing, various elements are combined by building blocks, and through optimization design, they can adapt to the processing of various process formula materials.

4. The co rotating twin screw extruder is a dynamic reactor with reactive capacity. A series of chemical reactions, such as polymerization and grafting, can occur after the materials are melted in the barrel. Reactive extrusion processing is mainly used for polymerization of monomers or oligomers (free radical polymerization, addition polymerization, polycondensation and copolymerization); Controllable crosslinking and degradation of polyolefins; Graft modification of polymer (functionalization or polar grouping of polymer to achieve the purpose of material modification and preparation of compatibilizer); Forced blending modification of various materials. It also includes physical modification of materials, such as filling, mixing, toughening and strengthening.

Characteristics of co-rotating twin screw extruder 4
Characteristics of co-rotating twin screw extruder 5
Characteristics of co-rotating twin screw extruder 6
Characteristics of co-rotating twin screw extruder 7

Делиться:

Facebook
Twitter
Pinterest
LinkedIn
On Key

Связанные сообщения

Long-Fiber-Reinforce-

Обзор материалов для 3D-печати и их применения — Полимерные материалы для 3D-печати

Технология 3D-печати — это интеллектуальная технология производства, возникшая в 1980-х годах и объединяющая в себе машины, компьютеры, системы числового управления и материалы. Основной принцип этой

Read More »
Long-Fiber-Reinforce-

LFT (длинноволокнистый термопласт)

Армированный длинным волокном термопласт относится к категории длинноволокнистых гранул. Он является современным материалом, предназначенным для производства разнообразных изделий. Его часто называют LWRT, однако к данной группе

Read More »
Long-Fiber-Reinforce

Концентраты красителей / мастербатчи (masterbatch)

Цветной мастербатч — это специальный краситель для новых полимерных материалов. Различные типы цветных суперконцентратов имеют разное применение. Однако в основном цветные суперконцентраты используются для окрашивания

Read More »

Запрос

Запрос

Запрос

We welcome your cooperation and we will develop with you.